System Specifications - SpringWell WS1 Installation Instructions Manual

PLEASE READ INSTRUCTIONS FULLY PRIOR TO ATTEMPTING INSTALLATION. Be sure to follow
all applicable plumbing codes. The system must be installed on a main water supply line

System Specifications

WS1
Tank Width
Tank Height
Flow Rate
Connection Size
Backwash Rate
Operating Pressure
Operating Temperatures
pH Range
Level Tank
Leaning Tank
Tank Boot
If the tank is not perfectly straight, carefully lift the tank straight up a few inches and tap it on the ground until
the tank stands vertically and fits snuggly into the tank boot.
Well Water Filter System
10"
54"
(64" with Head)
12 GPM Service
3/4"
5 GPM
25-80 PSI
36 – 120 F
6.5 - 10
Questions? Call (800)-589-5592
WS4
13"
Tank Width
54"
Tank Height
Flow Rate 18 GPM Service
3/4"
Connection Size
Backwash Rate 7 GPM
Operating Pressure 25-80 PSI
36 – 120 F
Operating
Temperatures
6.8 – 10
pH Range
(64" with Head)
3