ASSEMBLY
1. When you insert these lights into decking, you need to use a drill bit with a diameter
of Ø2.6 cm.
2. Put the lights into the drilled holes.
3. Connect the light to the Belys transformer or another Belys product that is connected
to the Belys system's transformer. Check that the plug is correctly installed and that
the cable does not move.
1
Ø 2.6 cm
TECHNICAL DATA
Voltage
12 V
Power
5x0,15 W
Safety class
III
IP code
IP 67
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling in
accordance with local rules for waste management.
2
3
Need help?
Do you have a question about the DECKLIGHT and is the answer not in the manual?
Questions and answers