Technical Data - RUSTA Kensington Manual

ASSEMBLY
1. Screw the sections of the spotlight together.
2. Put the light into the ground. NOTE! Do not push the light into the ground. If the earth is
hard, we recommend softening it up before putting the light in. Check that the light is
firmly in place.
3. Connect the light to the Belys transformer or another Belys product that is connected to
the Belys system's transformer. Check that the plug is correctly installed and that the
cable does not move.
The light fixture can also be attached to the base using screws. (Screws are included).
1

TECHNICAL DATA

Voltage
Power
Safety class
IP code
INFORMATION ABOUT HAZARDOUS WASTE
End-of-life electronic products may not be discarded in regular household waste.
Make sure to dispose it at an appropriate public recycling site. Check with your
municipality or your reseller for more information about recycling or public
recycling sites.
2
12V
3W
III
IP 44
3
3