Download Print this page

Sage Smart Kettle SKE825 Quick Manual page 4

Hide thumbs Also See for Smart Kettle SKE825:

Advertisement

Available languages

Available languages

PAGE HEADER.....
SAGE
RECOMMENDS SAFETY FIRST
®
• Any maintenance other
than cleaning should be
performed at an authorised
Sage Service Centre.
• This appliance is for household
use only. Do not use the
appliance for anything other
than its intended use. Do not
use in moving vehicles or boats.
Do not use outdoors. Misuse
may cause injury.
• The installation of a residual
current device (safety switch
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable
that a safety switch with a
rated residual operating
current not exceeding 30mA
be installed in the electrical
circuit supplying the appliance.
See your electrician for
professional advice.
• Always turn the appliance to
the off position, switch off at the
power outlet and unplug at the
power outlet when the appliance
is not in use.
• The appliance and it's
cord should be kept out
of reach of children aged
8 years and younger.
• Cleaning of the appliance
should not be carried out by
SAVE THESE INSTRUCTIONS
4
children unless they are 8 year
or older and supervised.
• Do not use the appliance if
power cord, power plug or
appliance becomes damaged
in any way. If damaged or
maintenance other than
cleaning is required, please
contact Sage Customer Service
or go to sageappliances.com
WARNING
Do not operate the kettle
on an inclined surface.
Do not move the kettle
while it is switched on.
The symbol shown
indicates that this appliance
should not be disposed of
in normal household waste.
It should be taken to a local
authority waste collection centre
designated for this purpose or to
a dealer providing this service.
For more information, please
contact your local council office.
To protect against electric
shock, do not immerse the
kettle base, power base, power
cord or power plug in water or
allow moisture to come in contact
with these parts. Avoid spilling
water onto the power
base's connector.

Advertisement

loading