Configuration1 Menu; Factory Reset; Configuration2 Menu; Information Osd - Hitachi DS65MU01 User Manual

6.2.4. Configuration1 menu

Picture Switch on state
Screen Panel saving
Audio RS232 routing
Configuration 1 Boot on source
Configuration 2 WOL
Advanced option RGB Range
Configuration1 reset

Factory reset

Switch on state
Select the display status used for the next time you
connect the power cord.
{Power off} - The display will remain off when the
•
power cord is connected to a wall outlet.
• {Forced on} - The display will turn on when the
power cord is connected to a wall outlet.
{Last status} - The display will return to the
•
previous power status (on/off/standby) when
removing and replacing the power cord.
Panel saving
Choose to enable the panel saving functions and thus
reduce the risk of
"image persistence" or "ghost-imaging".
• {Brightness} - Select {On} and the image
brightness will be reduced to an appropriate level.
The Brightness setting in the Picture menu will be
unavailable when selected.
• {Pixel shift} - Select the time interval ({Auto} / {10
~ 900} Seconds/ {Off}) for the display to slightly
expand the image size and shift the position of
pixels in four directions (up, down, left, or right).
Note: Only support external input source (HDMI, VGA,
DP, OPS).
RS232 Routing
Select the network control port.
Choose from: {RS232} / {LAN -> RS232} /
{CardOPSRS232 (OPS model only)}.
Boot on source
Choose to select source when boot up.
Input: select input source when boot up.
Playlist: select playlist index for Media player, Browser,
PDF player.
0: no play list. Same as switch source from OSD.1~7:
playlist number.
No failover function, system will keep source even the
source is no signal input.
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}
RGB Range
Force on
Manual correction gray-scale color.
Action
RS232
Action
Configuration1 reset
Off
Reset all settings in Configuration1 menu to the
Auto
Action
factory preset values.
Action
Factory reset
Reset all settings in the OSD menus of {Picture},
{Screen}, {Audio}, {Configuration1}, {Configuration2},
and {Advanced option} to the factory preset values.
Android settings will also reset when factory reset.
Press
[OK] button to do the reset.

6.2.5. Configuration2 menu

OSD turn off
Set the period of time the OSD (on-screen display)
menu stays on the screen.
The options are: {Off, 5 ~ 120} seconds.
*{Off} does not disappear automatically.
OSD H position
Adjust the horizontal position of the OSD menu.
OSD V position
Adjust the vertical position of the OSD menu.

Information OSD

Set the period of time the information OSD is
displayed on the upper right corner of the screen.
The information OSD will display when input signal is
changed.
The information OSD will remain on the screen with
{Off} selection.
The options are: {1 ~ 60} seconds.
37
[ ] [ ]
or button to select {Reset}, and press
Factory reset
CANCEL
Picture OSD turn off
Screen OSD H position
Audio OSD V position
Configuration 1 Information OSD
Configuration 2 Logo
Advanced option Monitor ID
Heat status
Monitor information
HDMI Version
Configuration2 reset
DS65MU01
Reset
45
50
50
10
On
Action
24.21°C 75.57°F
Action
Action