Midland BT SINGLE Instruction Manual page 25

Wireless headset system
Hide thumbs Also See for BT SINGLE:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
LIGHT AND SOUND SIGNALS
LED indication
GENERAl
none
Single Blue flash every 3 seconds
Triple red flash
Single Blue flash every 3 seconds
Single Red flash every 3 seconds
ReD and BlUe (together) every 3
seconds
ReD and BlUe (together) and one flash
of ReD light every 3 seconds
Single red flash every 2 seconds
SETUp
Steady Red
Rapid Red-Blue alternating flash
Steady Blue for two seconds
Audio signals
Ascending tone (low-high)
Descending tone (high-low)
1 tone
2 tones
UNIT FUNCTIONS
If you want to...
GENERAl
Turn on the unit
Turn off the unit
increase the volume
Decrease the volume
MOBILE PHONE
Answer a call
Reject a call
Terminate a call
Status
Unit is switched off or full charged when connected to the power supply
Unit being turned on
Unit being turned off
Standby
Standby - low battery
Active
Active but low battery
Unit in charge when connected to the power supply
Setup mode
Pairing mode (searching for devices)
Successful pairing/ Reset paired devices
Status
Unit being turned on
Unit being turned off
Specific feature turned on
Specific feature turned off
...do this
Press the Music button for 3 seconds at least (start Blue flash)
Press the Music and AUX button together for 3 seconds (triple Red flash)
Short or continues press on the Volume Up control
Short or continues press on the Volume Down control
Short press of the Phone button / say a word
long press the Phone Button / remain silent until the rings stop
Short press the Phone Button
11

Advertisement

Table of Contents
loading

Table of Contents