Chapter 4. Using The Dvd Station; Starting The Dvd Station - Sigma Designs REALmagic NetStream 2000 User Manual

NetStream 2000 Manual 6.6.2000

Chapter 4. Using the DVD Station

The DVD Station is a versatile Windows utility that allows you to
play a variety of DVD, Video CD, and CD formats. This section
describes how to use the DVD Station to play full-length feature films
recorded in the DVD and Video CD formats, and data CDs contain-
ing MPEG files and also Audio CDs. The DVD Station will automat-
ically detect the format of the disc in your DVD drive and identify the
file type in the Display Panel. The DVD Station can also detect
MPEG files in your CD-ROM and hard drives.
Your DVD drive must be DVD compliant to be able to play DVD-
Video and DVD-ROM. Check the owner's manual for your DVD
drive to make sure your DVD drive meets these requirements before
attempting to play DVD discs.
14 Chapter 4: Using the DVD Station
6/6/00 2:47 PM Page 19

Starting the DVD Station

Follow the steps below to start the DVD Station:
1. Start Windows, if you have not already done so.
2. Insert a DVD disc, a Video CD, or a CD-ROM containing
MPEG files into your DVD drive.
3. From the task bar, click Start, and then click Programs. Click
REALmagic NetStream 2000 and then click DVD Station.
4. The DVD Station (Figure 7) is displayed on the screen. (DVD
Station looks best if Windows has 256 or more colors.)
5. If the Auto-Play feature in DVD Station is enabled, DVD
Station will begin playing the disc in the DVD-ROM drive as
soon as one is inserted.
Figure 7. DVD Station