Blanking menu
•
Top
Press ◄/► to adjust the top blanking area on the projected picture.
•
Bottom
Press ◄/► to adjust the bottom blanking area on the projected picture.
•
Left
Press ◄/► to adjust the left blanking area on the projected picture.
•
Right
Press ◄/► to adjust the right blanking area on the projected picture.
•
Reset
Press ENTER to set up all Blanking settings to default.
3D menu
3D Sync Mode
•
Press ◄/► to select the 3D sync mode. The options are DLP Link and VESA 3D.
•
3D Mode
Press ENTER to enter the 3D Mode menu. Press ▲/▼ to select the 3D format. The options
are Auto, Top-Bottom, Frame Sequential, Frame Packing, Side-By-Side and Off.
3D Sync Invert
•
Press ◄/► to enable or disable 3D Sync Invert.
•
3D Sync Out Delay
Press ◄/► to adjust 3D sync out signal delay.
Save 3D Settings
•
Press ENTER to enter the Save 3D Settings menu. Press ▲/▼ and ENTER to save the
current 3D settings.
•
Apply 3D Settings
Press ENTER to enter the Apply 3D Settings menu. Press ▲/▼ and ENTER to apply the
saved 3D settings.
45