The product/system described in this documentation may be operated
only by personnel qualified for the specific task in accordance with
the relevant documentation, in particular its warning notices and safety
instructions. Qualified personnel are those who, based on their train-
ing and experience, are capable of identifying risks and avoiding po-
tential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
Siemens products may only be used for the applications described
in the catalog and in the relevant technical documentation. If prod-
ucts and components from other manufacturers are used, these
must be recommended or approved by Siemens. Proper transport,
storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely
and without any problems. The permissible ambient conditions must
be complied with. The information in the relevant documentation
must be observed.
All names identified by ® are registered trademarks of Siemens AG.
The remaining trademarks in this publication may be trademarks
whose use by third parties for their own purposes could violate the
rights of the owner.
Compact Operating Instructions ANT792-8DN