Getting Started; Installing The Base; Installing The Batteries - Topcom TS-5611 Short User Manual

Sologic TS-5611
1

Getting started

Thank you for purchasing this Tristar product. This product has been designed
and assembled with utmost care for you and the environment. Because we at
Tristar like to think of the future of our planet and our children, we aim to do
our best to help saving the environment. This is why we decided to reduce the
number of pages of our user guides and product manuals. If you keep in mind
that it takes up to 24 trees to produce 1 ton of paper, publishing product manuals in 11
languages costs our planet a lot of trees. In this short manual provided with your Tristar
device you can find a brief explanation of how to install and use your Tristar device.If you
would still like to discover all the features of your new Tristar device, please visit our website
(www.Tristar.net) where you can download the complete user manual in your language. By
doing this Tristar hopes to do its share to make our planet a better place, but we can only
succeed with your help!
2 Installation
2.1

Installing the base

For installation, do the following:
4
• Plug one end of the adaptor into the 230V outlet and the other end into the adapter jack
on the bottom of the base.
• Connect one end of the telephone cord with the wall phone jack and the other end to the
bottom of the base. Use the included telephone cord.
1. Power cable
2. Telephone wall outlet
3. Telephone cord
4. Bottom view of the base
2.2

Installing the batteries

• Open the battery compartment (see below).
• Insert the batteries respecting the (+ and -) polarity.
• Close the battery compartment.
• Leave the handset on the base unit for 16 hours. The handset charging indicator
LED on the base unit will light up.
17
4
1
3
2
Sologic TS-5611