Setting The Speaker Volume; Call Duration Indicator On The Display; Using The Alphanumeric Handset Keypad; Setting The Ring Volume Level On The Handset - Topcom TS-5611 Short User Manual

Sologic TS-5611
4.6 Activate / deactivate handsfree function
This function allows you to communicate without having to pick up the handset. When you
are talking, press the handsfree key
Press the button again to deactivate the handsfree function.
12
4.7

Setting the speaker volume

Use the up and down keys
speaker. You can select from 5 levels.
The handsfree volume can be set the same way as above!
4.8

Call Duration Indicator on the Display

During an external call, the call duration is shown on the display:
E.g. "01:10:40" for 1 hour, 10 minute and 40 seconds.
The call duration remains visible on the display for 5 seconds after each call.
4.9 Turning off the microphone (mute)
To turn off the microphone during a call press the right menu key 'Mute'
can speak freely without the caller being able to hear you. To activate the microphone again,
press the right menu key 'Mute'
4.10 Locating a misplaced handset (paging)
If you cannot find the handset, briefly press the paging key
All handsets subscribed on the base unit will ring so you can locate the misplaced handset.
To stop the signal, briefly press any key on any handset.

4.11 Using the alphanumeric handset keypad

Use the alphanumeric keypad to type text. To select a letter, press the corresponding
alphanumeric key
appears on the display. Press it repeatedly to select other characters from this key.
Press the '2' key once to select the letter 'a'. If you would like to select both 'a' and 'b' after
each other, first press the '2' key once to select 'a', wait 2 seconds until the cursor moves to
the next position and then press the '2' key twice to select 'b'. You can delete characters
mistakenly typed by using the 'Erase' key. The character in front of the cursor will be deleted.
You can move the cursor by pressing the up and down keys

4.12 Setting the ring volume level on the handset

You can change the ring volume of an incoming call (internal and external) between 6 levels
(levels '1' to '5' and 'Off').
If you select level 'Off' the handset will not ring when a call is received.
Level '5' is the highest level.
4.12.1 Setting the ring volume and Melody for Internal and external calls
• Press the 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
10
/
15
again.
5
. E.g. if you press the alphanumeric key '5', the first character 'j'
8
/
15
to activate the handsfree function.
12
during conversation to set the volume of the
7
repeatedly until 'HS Settings' is selected.
7
key. Now you
5
on the base unit.
19
/
.
15 7
Sologic TS-5611