Download Print this page

Technical Data; Assembling The Grass Trimmer; Proper Use - EINHELL BG-ET 250 Directions For Use Manual

Advertisement

Anleitung_BG_ET_250_SPK7:_
GB
3. Symbols used on the appliance
(see Figure G)
Item 1: Warning! Read the instruction manual
before starting
Item 2: Wear eye protection
Item 3: Protect from moisture
Item 4: Pull out the mains plug before checking a
damaged power cable
Item 5: Keep other people, children and animals
out of the danger area

4. Technical data

Voltage
Power rating
Cutting width
Speed
Nylon cutting line
Sound pressure level L
pA
Sound power level L
WA
Vibration a
hv
Protection class:
Weight
Sound and vibration were measured in accordance
with EN 786.

5. Assembling the grass trimmer

To mount the item
Push the 2 parts of the item together (Figure A).
Be careful not to trap the cable.
To install the safety hood
Place the safety hood on the motor head (Figure
B) and then turn it clockwise until it engages.
Secure it with the screw supplied.

6. Proper use

The trimmer is designed for cutting lawns and small
areas of grass in private and hobby gardens.
Tools for private and hobby gardens are not suitable
for use in public facilities, parks and sport centers,
along roadways, on farms or in the forestry sector.
For the tool to be used properly it is imperative to
follow the instructions set out in the manufacturerʼs
directions for use.
Important! It is prohibited to use the tool to chop
material for composting because of the potential
danger to persons and property.
6
10.10.2008
8:04 Uhr
Seite 6
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
7. To start
The grass trimmer is designed only to cut grass.
The grass trimmer has a semi-automatic line
230V ~ 50 Hz
extension system. Each time you activate the semi-
250 W
automatic line extension system, the line will be
ø 24 cm
extended to ensure that you can cut your lawn with
12,500 rpm
the perfect cutting width at all times.
Please note that the wear on the line will be
ø 1.2 mm
increased if you activate the semi-automatic line
82 dB(A)
extension system frequently.
95 dB(A)
≤ 2,5 m/s
2
Note
Before the first use, remove the blade cover from
II/®
the blade (Figure A/Item 2)
1,8 kg
Note
If the line is too long when you use the machine
for the first time, the surplus end of it will be cut
by the blade on the safety hood.
If the line is too short when you start the machine
for the first time, press the knob on the line spool
and pull the line hard. When you then start the
machine for the first time the line will be cut to
the perfect length automatically.
Your grass trimmer will work at its best if you
observe the following instructions:
Never use the grass trimmer without its safety
devices.
Do not cut grass when it is wet. The best results
are had on dry grass.
To switch on your grass trimmer press the
ON/OFF switch (Figure 1 Item 3).
To deactivate the grass trimmer, let go of the
On/Off switch (Figure 1 / Item 3).
Do not move the grass trimmer against the grass
until the switch is pressed, i.e. wait until the
trimmer is running.
For the correct cutting action, swing the grass
trimmer to the side as you walk forward, holding
it at an angle of approx. 15° as you do so (see
Figure F).

Advertisement

loading