Download Print this page

EINHELL BG-ET 250 Directions For Use Manual page 11

Advertisement

Anleitung_BG_ET_250_SPK7:_
Make several passes to cut long grass shorter
step by step from the top (see Figure E).
Make full use of the edge guide and the guide
hood in order to avoid unnecessary line wear.
Keep the grass trimmer away from hard objects
in order to avoid unnecessary line wear.
8. Replacing the line spool
Be sure to disconnect the power plug from the power
supply before you replace the line spool!
Press the sides of the spool cover as shown and
remove it with the spool (Figure D). Ensure that
you do not lose the spring.
Remove the empty line spool.
Thread the ends of the line on the new line spool
through the eyelets in the spool cover.
Fit the spool cover and spool back into the spool
mounting.
When you start the machine again the line will be
cut to the perfect length automatically.
Caution! Catapulted pieces of nylon line may
cause injury!
9. Cleaning and maintenance
Switch off and unplug the grass trimmer before
putting it away or cleaning it.
Remove deposits from the guard hood with a
brush.
Clean the plastic body and plastic parts with a
mild household detergent and a damp cloth.
Never use aggressive agents or solvents for
cleaning purposes!
Never spray down the grass trimmer with water.
Prevent water getting into the trimmer at all cost.
10. Troubleshooting
The machine will not work: Check that the power
cable is connected properly and check the mains
fuses.
If the machine will not work despite the voltage
supply being OK, send it to the specified after-
sales service address.
11. Waste disposal
Important
The grass trimmer and its accessories are made
of various types of material, such as metal and
plastic. Defective components must be disposed
of as special waste. Ask your dealer or your local
council.
10.10.2008
8:04 Uhr
Seite 7
12. Ordering replacement parts
The following information should be given when
ordering replacement parts:
Model/type of the equipment
Art. No. of the equipment
ID No. of the equipment
Part number of the required spare part
Helpline number: 0151 649 1500
GB
7

Advertisement

loading