Blaupunkt RATK 750104 Manual page 15

4. Ganze Einheit mit dem Mähkopf gegen den Uhrzeigersinn drehen, bis sie einrastet.
5. Einheit mit Montageschraube (16a), Federscheibe (16b) und U'scheibe (16c) befestigen.
6. Schutzfolie vom Fadenmesser vorsichtig abziehen.
!
WARNING! Never use the line trimmer unless the safety guard is properly fitted.
E. Assemble the Front handle.
1. Press the locking button and hold, and then assemble the front handle;
2. Secure it with one 4.2x15 screw supplied. Be careful not to overtighten.
3. If you want to adjust the handle position, do the step as following:
a. please press the locking button(4) and then rotate the front handle(3),
b. until the button clicks securely into locked position to a comfortable working height, and then release it.
F. Adjusting the Cutting height.
The line trimmer shaft can be adjusted to suit the height of the operator.
1. Pull the adjusting knob (5).
2. Adjust the telescopic shaft up or down to the appropriate height.
3. Tighten the telescopic shaft button once adjustment is complete.
4
3
4