Advertisement
1
2
3
Download and install the latest DisplayLink
drivers at www.elotouch.com/support.
Note: DisplayLink driver installation requires
another display to be functioning during
driver installation because the 0702L will not
function without the drivers installed.
Connect the micro USB cable. Ensure the
rubber gasket (red) is all the way inside the
cable cover area.
Install the cable cover by installing the top
side first and rotating it down. Secure the door
with the M3 screw included.
4
75mm
75mm
5
Data Connector
Connect the Data Connector of the Y-Cable to the host PC USB port.
Note: Some computers also require connecting the AUX Power
connector to the host PC.
Go to
www.elotouch.com/support
请访问www.elotouch.com.cn
Monitor can be mounted to any standard
75mm x 75mm VESA mounting bracket
using four M4x8mm screws.
AUX Power Connector
to download user manual.
获取用户手册 请保留备用
Advertisement
