Table of Contents
Advertisement
5. power on the WatCHpaX 40.
6. during startup, you will see a five-second countdown in the top left corner of the display. press esc
during this countdown.
note: If you don't see a counter, it means the display device is slow to lock to the output using
displayport. press esc repeatedly after power-on to move to the menu below.
7. select the desired reset option in the menu that appears, and press enter.
8. IMportant: there will be no confirmation: the reset process starts immediately, providing some
visual feedback.
9. the WatCHpaX 40 will restart several times in order to configure the operating system and
hardware.
InstallatIon and operatIon
11
Advertisement
Table of Contents
Need help?
Do you have a question about the WATCHPAX 40 and is the answer not in the manual?
Questions and answers