Qwic URBAN Series Manual page 52

Adjusti ng the bicycle
Saddle
Desired seat height
With the seat height the distance between the saddle
and pedal in the lower positi on is meant. The seat
height is properly adjusted when the knee is bent just
a litt le while you stand with your foot on the pedal (in
the lower positi on). Please do not hesitate to ask your
dealer for advice!
i
If you can put your feet fl at on the ground, your
saddle is too low.
52
Seat height adjustment
The height of the seat can be adjusted by turning the
Allen bolt in the seat clamp loose with an Allen key.
!
The safety marks should never be visible when
the seat is adjusted in height.
Saddle positi on adjustment
By the saddle connecti on you can ti lt the seat and
adjust it to front as well as to the back.
To adjust the saddle by the saddle clamp turn the
bolt(s) on the underside (or the sides) of the saddle
clamp to loosen it.
Do not forget to ti ghten the bolts and make
!
sure that your seat is att ached fi rmly again
aft er adjustments! Tighten the bolts to a
torque between 18 and 25 Nm.
Seatpost suspension adjustment
By a seatpost with suspension you can also adjust the
suspension with an Allen bolt at the bott om of the
seatpost tube. This bolt is accesible when the seat post
is completely taken out.
Adjusti ng the bicycle