Operating The System - Philips FW-C55/22 User Manual

CONTROLS
º SLEEP TIMER
– to switch the system to standby mode
at a selected time.
⁄ B
– to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. CD, TUNER, etc.).
– Then select the desired function
( É , í , ë , etc.).
10
pg 01-26/C55/22-Eng new 10

OPERATING THE SYSTEM

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT REC
NEWS T.A. AM MW FM LW
60Hz 250Hz
500Hz 1KHz
STANDBY
ON
CLOCK/
TIMER CD1 • 2 • 3 BAND
CD TUNER
PROG
SEARCH • TUNING STOP•CLEAR PLAY PAUSE
SOUND NAVIGATION
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
3/6/00, 11:43 AM
STEREO
BACK
FRONT
HSD
8KHz
2KHz 4KHz
RDS
NEWS/TA
TAPE 1 • 2 CDR/VIDEO
TAPE AUX
A. REV
PRESET
PREV SIDE NEXT
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Notes:
– When the system is switched on from
the main power outlet, the CD carousel
tray may open and close again to
initialize the set.
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
3139 116 19551