Powering On The Robot And Controller - Robotex AVATAR III User Manual

D) Powering On the Robot and Controller
Robot
There is no on/off switch on the robot itself. The robot is powered on and off by inserting
and removing the battery.
Power On: The robot is powered on whenever the battery is installed.
Power Off: The robot is powered off whenever the battery is removed.
There is a third option where the battery may be stored in the robot and the robot remains
powered off. To do this, press the red button on the opposite side of the robot from the
battery bay and hold until the battery door is closed. If the fans didn't turn on, the robot is
powered off. If you press the button when the robot is already on with the battery
installed, it does nothing.
If you've used the red button, simply remove the battery and put it back in to power on the
robot.
Controller
The Controller has a small black power button located in the top right corner of the
controller (just above the screen).
Power On: The Controller is powered on by pressing the black round power button.
Power Off: The Controller is powered off by pressing and holding the black round power
button down until the LED light turns off.
7
Avatar® III User Manual Rev D 12/2015