Video Recording - Robotex AVATAR III User Manual

Channel Selection
To activate the Channel Selection capability, press
following box:
First select the channel to be set to, and then press the 'Set Channel' button. Changing
channels can take up to 1 minute depending on the signal strength and surrounding
condition. If the channel is not switched successfully, it will automatically return to the
default channel which can take up to 2 minutes.
The number next to the signal strength bars indicates the current channel.
NOTE: IF YOU HAVE A 900 MHZ RADIO, IT WILL ONLY WORK ON CHANNELS 3, 5,
AND 7 (5 USUALLY WORKS THE BEST). DO NOT SELECT THE OTHER CHANNELS AS THE
PERFORMANCE WILL BE POOR ON THESE CHANNELS.
Video Recording
To activate the Avatar® III's audio and video recording capability, press
will prompt the following box:
Press 'REC' again to prompt the box for stopping the recording:
16
Avatar® III User Manual Rev D 12/2015
– Located at the top left of the screen.
The dot flashing dark and light red
indicating recording in progress
and it will prompt the
Showing amount of time
remaining for recording
Press to start recording
Press to stop recording
and it