Attaching The Antennas - Robotex AVATAR III User Manual

3) Close the battery bay door by returning the
door to its closed position, making sure the
folding bar is folded over the battery and the
upper lip of the battery door tucks underneath
the top strip of the battery bay. Shut the latch
and turn the "Closing Knob" clockwise. You
should feel a "pop" or click" when the battery
door has closed.
IF FLIPPERS ARE BLOCKING THE BATTERY
DOOR, MOVE FRONT FLIPPERS AND BACK
FLIPPERS. FRONT AND BACK FLIPPERS MUST
BE MOVED IN PAIRS. DO NOT MOVE ONE
FLIPPER AT A TIME.
C) Attaching the Antennas
Make sure that the controller antenna is attached before powering the unit on. (Also
make sure you don't power on the robot without the robot radio installed)
6
Avatar® III User Manual Rev D 12/2015
When closing the battery door,
make sure the lip at the top strip
of the battery door tucks
underneath the top of the battery
bay.
The controller antenna attaches to the
silver port on the top left of the controller.
DO NOT plug it into the covered black port
on the top right side of the controller. If
you have more than one radio, make sure
you are attaching the appropriate antenna
for the radio you have installed. The
controller antenna will be color
coordinated with the robot radio antenna.
DO NOT PUT ANTENNA ON RIGHT
PORT (COVERED BY BLACK CASING).
DOING SO WILL PERMANENTLY DAMAGE
YOUR CONTROLLER.