When You Stack Your Micowave Ovens - Caso CMP1800 Operating Manual


Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.

The device requires an adequate flow of air in order to operate correctly. Leave a
clearance of 10 cm above the oven, 10 cm around the back and 10 cm on both sides.

Do not cover up any openings on the device and do not block these off.

Do not remove the device's adjustable feet.

The electrical socket must be easily accessible so that the power lead can be
disconnected easily, in the case of an emergency.

The installation and assembly of this device in non-stationary setup locations (e.g. on
ships) must be carried out by specialist companies / electricians, provided they
guarantee the prerequisites for the safe use of this device.
13.5.2

When you stack your micowave ovens

1) Place one microwave oven on top of the other one, and remove the plate which are
each secured by a single screw to the bottom-right corner at the rear of both microwaves.
2) Use the upper and lower plate screw holes to secure the upper and lower microwave
ovens with the four screws.
3) Ensure the top oven is at a safe and workable height
caso CMP1800 45