Recording - Philips FW-C28/25 User Manual

FW- C10 MINI HIFI SYSTEM
STANDBY-ON
C D 1 • 2 • 3 BAND
CD TUNER
TUNING
SEARCH STOP• CLEAR
DIGITAL
DSC
SOUND
CONTROL
PROGRAM RECORD DUBBING
DIGITAL SOUND CONTROL
OPEN
PLAY/ REC
TAPE 1
FULL AUTO STOP
pg 01-24/C28/34-Eng 19
•
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
TAPE 1 • 2 VIDEO
TAPE AUX
PRESET
PLAY• PAUSE PREV NEXT
A.REPLAY DIM
•
RDS NEWS CLOCK TIMER
VOLUME
OPEN
PLAYBACK
TAPE 2
Notes:
– For recording, use only tape of IEC type I
(normal tape) or IEC type II (Cr0 2 ).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of VOLUME,
DBB or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side that you want to protect.
– If " CHECK TAPE " is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr0 2 tape
detection hole when covering the tab
opening.
One Touch Recording
• For One Touch Recording, as soon as you
press RECORD, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
™ The
starts flashing.
REC
3 Press Ç to stop recording.
Note:
– When you press RECORD while in TAPE
mode, " SELECT SOURCE " will be
displayed. One Touch Recording is not
possible in TAPE mode.
2/23/00, 8:06 AM

RECORDING

CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
3 Press RECORD to start recording.
™ The starts flashing.
REC
• CD will start playback automatically.
4 Press Ç to stop recording.
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck 2
with full spool to the left.
3 Press DUBBING
™ "DUB" with "2" scrolling right will be
displayed.
• Dubbing will start immediately.
™ The starts flashing.
REC
4 Press Ç to stop dubbing.
3139 116 19341
19