Tesco PFR1614W User Manual page 6

OPERATING INSTRUCTIONS
1. Press the ON/SPEED button for the required fan speed.
When switched on, the unit will operate at the same
speed selected and the appropriate LED will glow.
When the unit is switched off, all LED will turn off.
Pressing the ON/SPEED button will change the fan
speed from Low to High.
2. When first switched on, the "MODE" LED will glow
Red, indicating that the unit will operate in normal
mode. Fan speed is constant.
Pressing the MODE button will select different modes
of operation as follows:
Red LED: Fan speed operates as normal.
Green LED: speed varies to simulate sleeping wind
No LED: Fan speed varies to simulate a natural
breeze.
3. The unit is fitted with a timer that can be used
to switch the unit off after 30mins or in 30min
increments to a maximum of 7.5hours. e.g. Pressing
the TIMER button 4 times will switch the unit off after
2 hours and pressing 7 times will switch the timer off
after 3.5 hours. The selected time is a total of the time
indicated by the illuminated LED's
4. To make the fan head oscillate, push the Oscillation
Knob DOWN. To stop the oscillation. Pull the
Oscillating knob UP.
5. To adjust the angle of the fan head, move the head to
the desired angle and the head will latch into place.
CAUTION: The fan should be switched off when making
this adjustment.
6. To adjust the height of the pedestal fan, loosen the
height adjustment nut carefully raising or lowering
the fan and firmly re-tighten the height adjustment
nut.
CAUTION: The fan should be switched off when making
this adjustment.
Control panel
High
Medium
Low
Mode
4H
2H
1H
0.5H
Remote control
On/Speed
Timer
Mode
EN
5
PFR1614W
Off
On/Speed
Mode
Timer
Sensor
Off