Tesco PFR1614W User Manual page 4

ASSEMBLY INSTRUCTIONS
1. Attach the column of the stand with the 4 screws as
shown.
2. Remove the 4 screws and save them.
3. Line the base stand with column. Screw the column
firmly into the stand with the 4 screws.
4. Take off the height adjustment screw.
5. Slide the stand cover down the column to rest on the
stand.
6. Pull out the extension column and refit the height
adjustment screw.
Caution: The height adjustment screw must be fully
tightened before assembling the motor section to the
pedestal stand.
EN
3
Height adjustment screw
Stand cover
Four screws
PFR1614W