Radio Reception; Tuning To Radio Stations; Storing Preset Radio Stations; Automatic Preset Programming - Philips FWM35/25 User Manual

Radio Reception

Tuning to radio stations

1
Press TUNER to select TUNER mode.
"TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2
Press TUNER again to select the desired
waveband : FM or MW.
3
Press and hold à or á until the frequency
indication starts to change, then release.
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.

Storing preset radio stations

You can store up to 40 preset radio stations in
the memory.

Automatic Preset Programming

Plug and Play setting (refer to "Basic Functions -
Plug and Play").
OR
1
Press TUNER to select TUNER mode.
18
To begin automatic preset from a desired
preset number
Press í or ë to select the desired preset
number.
If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until "AUTO" is
displayed.
starts flashing.
PROG
The system will automatically store the radio
stations with sufficient signal strength, starting
from all RDS stations and followed by FM and
MW bands respectively. Weak RDS stations may
be stored in later presets.
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station (or the first available
RDS station) will be played.
To stop storing the automatic preset
Press PROGRAM or Ç on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
y
CD1/2/3 TUNER TAPE1/2
AUX
REP/SHUF PROGRAM DIM
VOL
TITLE
ALBUM
SLEEP TIMER ON/OFF MUTE
DSC DBB