Dim Mode; Volume Control; Sound Control; Dsc (Digital Sound Control) - Philips FWM35/25 User Manual

Basic Functions

Dim mode

You can select the desired brightness for the
display.
In any source mode (except Eco Power standby
or standby mode), press DIM MODE
repeatedly to select DIM 1, DIM 2, DIM 3 or
DIM OFF display mode.
is shown, except for DIM OFF mode.
DIM

Volume control

Adjust VOLUME to increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob anti-clockwise or press VOLUME -)
the sound level.
To listen through the headphones
Connect the headphones plug to
the n socket at the front of the
system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
Playback will continue without sound and
"MUTE" is displayed.
To restore the volume, press MUTE again or
increase the volume level.
14

DSC (Digital Sound Control)

The DSC feature enables you to enjoy special
sound effects that have preset equaliser settings,
providing the best music reproduction.
1
Press DSC to select : OPTIMAL, JAZZ, ROCK
or TECHNO.
The selected DSC is shown.

DBB (Dynamic Bass Boost)

There are three DBB settings to enhance the
bass response.
1
Press DBB to select : DBB 1, DBB 2, DBB 3 or
DBB OFF.
The selected
DBB
OFF mode.
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
Automatic DSC-DBB selection
The best DBB setting is generated automatically
for each DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
is shown, except for DBB