RUSTA HYBRID 108 CM Manual page 5

4
Connect the cable from the post to the
lantern as shown in the illustration below.
Then screw the lantern to the post.
5
Connect the transformer to
the lamp post as shown in the
illustration below.
The power switch is on one side of the lantern
and has three settings.
- If you want white light, turn the switch to 'W' as shown in the
diagram below.- For warm white light, turn the switch to 'WW' as
shown in the diagram below.
- To switch the lamp post off, turn the switch to 'OFF' in the centre,
as shown in the illustration below.
When you switch the power switch to the 'W' or 'WW' settings, the
lamp post will come on automatically when it gets dark.
WW OFF W
5