Safety Cable - Work Pro SoundNut Series User Manual

SN8
USER MANUAL
VERSION 1.1

Safety cable

Pass the loop end over
the building feature.
Adjust the desired height
by pressing the button
and sliding the locking
device at the same time.
SN8
Thread the tail wire
through the loop to
create a choke knot.
Pass the tip of the wire
through a free hole of the
hanging point of SN8.
www.workpro.es
Pass the tip of the wire
through a hole in the
Gripple® locking device.
Pass the tip of the wire
through the free hole in the
locking device. Ensure a
minimum 75mm of tail wire
exit the hanger.
9