PEZTIO K11 User Manual page 8

-In replay mode, press OK button to play/pause the video, press
the Up & Down direction button to switch videos.
2. Recording point
Red point will keep flashing while recording.
3. Lock sign
With lock sign, current file will be locked and can't be overwritten.
When G-sensor detects a collision, it will lock the current file, you
can also lock the file manually by pressing the lock button on the
camera.
4. Microphone
With microphone sign, the audio will be recorded.
You can adjust the microphone on/off in the video setting menu.
5. G-sensor
When G-sensor detects a collision, it will lock the current file. You
can adjust the sensitivity of G-sensor between
off/high/medium/low in the video setting menu. Different kind of
sensitivities requires different gravity to activate the G-sensor.
6. Recording time of current video
7. Parking mode
With this mode on, it will automatically begin to record when the
vehicle manifests shake after the vehicle key is off. You can adjust
the parking mode on/off in the system setting menu.
8. Current Video resolution
You can change the current video resolution between 1080P and
720P in the video setting menu.
The higher resolution you set, the clearer and larger video it
captures.
9. Loop recording
Automatically overwrite the oldest files without locking.
You can change the video length of loop recording between
off/1min-5mins in the video setting menu.
10. Current date
The date will be shown on the video if you turn the date stamp
on.
11. TF card installed