Power Source; Main Function - PEZTIO K11 User Manual

INTRODUCTION
Welcome to use PEZTIO DASH CAM. This is Model K11, which
equipped with 1080p lens. Automatic start to record, just plug
and play, video files will be saved on the memory card.

-POWER SOURCE

Use car charger (5V 1A) to get power from cigarette lighter. Need
to keep the power on to ensure the normal use.
WARNING:
Please keep the DASH CAM plugged into the power, plug and
play it. This is a small capacity battery. It will automatically shut
down after 10 seconds when the disconnect power.

-MAIN FUNCTION

1. Loop Record
The Loop recording video can be set the timing 1 min, 3min or 5
min. It will save the vital videos in case losing or damaging the
videos when an accident occurs, the TF card slipped out or the
power connection is loosening.
2. Emergency Record
Motion Detection: When the Motion Detection is on, it will detect
whether there is the moving object, and the recording will auto
on if it finds a moving object.
Gravity Sensor: When there is a severe bump in vehicles, the video
will be locked and will not be deleted by cyclic recording.
-MULTIPLES MODES
There are 3 modes of camera operation - Video, Photo and
Playback.
1. Video Mode: The default mode when the camera is turned on,
for video recording.
2. Photo Mode: Allows you to take still photographs.
3. Replay Mode: Allows you to view recorded video or
photographs upon the DASH CAM IPS screen.