Paxar Pathfinder Ultra 6032 Quick Start Manual

Pathfinder® Ultra® Silver (6032™) Printer
Pathfinder® Ultra® Gold (6037™) Printer
Loading Supplies in Peel Mode
Put the printer in load mode
1
and open the cover.
4
Peel four inches of labels
from the backing paper.
7
Push the Label Deflector up
until it snaps into place.

Cleaning Your Printer

Platen Roller
Use a dry, soft-bristle brush.
Printer Flex Cable
Use a soft cloth, lightly
moistened with
99% Isopropyl Alcohol.
TC603XWC Rev. AA 3/03
5
Gently pull the Label
Deflector down.
8
Closed to the
first position.
On-Demand Sensor
Use a dry cotton swab.
©2003 Paxar Americas, Inc. All Rights Reserved.
2
Do Not wrap the supplies
around this bar.
6
9
Pull the backing paper OVER
the Guide Roller, down to the
Pinch and Feed Rollers.
Press the trigger.
Pinch and Feed Rollers
Use a dry, lint-free cloth.
Scanner Window
Pull the
Label Deflector
down.
Use a soft cloth, lightly
moistened with water.
3
Over the Peel Bar
Under the Label Deflector
Close the cover.
10
Printhead
Use a cleaning pen or a
soft cloth, lightly moistened
with 99% Isopropyl Alcohol.
Black Mark Sensor
Use a dry cotton swab.
Guide Roller
(behind supply)
Feed Roller
(behind pinch roller)
Pinch Roller