Tape Operation/Recording; Tape Playback - Philips MC-57 User Manual

Tape Operation/Recording

STANDBY - ON
ECO
POWER
iR
OPEN
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).

Tape Playback

1
Press TAPE to select tape mode.
Press # OPEN to open the tape deck door.
2
3
Insert a recorded tape and close the tape door.
Load the tape with the open side down and the
full spool to the left.
4
Press PLAYÉ (É Å ) to start playback.
"TAPE" with playback direction indicator will
appear on the display.
22
M I C R O S Y S T E M
PAUSE
NEWS
To stop playback
Press Ç.
To change the playback side
Press í or ë.
the display, depending on the tape side selected.
To change the playback mode
Press AUTO REV. on the remote control
repeatedly to select the different playback
modes.
å
∂ : both sides are played once.
∫ : both sides are played repeatedly, up
To rewind or fast forward when playback
is stopped
1
Press à or á.
2
Press Ç when you reached the desired passage.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD,
TUNER or AUX, for example).
CD 1•2•3
PLAY STOP
DEMO STOP
TUNER
PREV NEXT
PRESET
TAPE
SEARCH/ TUNE
PROG REC AUX/CDR
VOL
BASS TREBLE
DIGITAL
SOUND
CONTROL
The A (BACK) or B (FRONT) appear on
: playback on one side of the tape only.
to 10 times each side unless you pressÇ.
-
- - + - +