Disc Operations
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
1
STANDBY-ON
CLOCK
RDS/
OPEN/
ECO POWER
NEWS
CLOSE
MP3-CD / CD-R / CD-RW COMPATIBLE
M I C R O
S Y S T E M
MP3-CD / CD-R / CD-RW COMPATIBLE
IR
1
Load the desired disc on the disc tray (refer
to "Loading disc".)
2
Press CD to select a disc.
3
Press PROGRAM to start programming.
➜
starts flashing.
PROG
4
Press í or ë repeatedly to select the
desired track.
●
For MP3 disc, press à / á and í / ë to
select the desired album and title for
programming.
5
Press PROGRAM to store.
●
Repeat steps 4~5 to select other tracks.
➜
If you attempt to program more than 99
tracks, "PROGRAM FULL" appears.
6
To start program play, press É Å .
7
To stop playback or to end the programming,
press Ç once.
➜
stays and the program mode remains
PROG
active.
Helpful Hints:
– If the total playing time reached 100 minutes or
if one of the programmed tracks has a number
greater than 30, then "-- : --" will appear instead
of the total playing time.
– The system will exit programming mode if no
button is pressed within 20 seconds.
18
CD
2
PROGRAM
3
5
,
4
6
7
Checking the program
1
Stop playback and press í or ë repeatedly.
2
Press ÉÅ to start playback from the
current programmed track.
Clearing the program
●
Stop playback, then press Ç to clear the
program.
OR
Press the OPEN/CLOSE 0 button of the
disc tray.
➜
disappears from the display and
PROG
"PROGRAM CLEARED" appears.
Helpful Hint:
– If the system is disconnected from the power
supply or you switch to other source mode, the
program will be erased.