Cd/Mp3 Operation; Loading A Disc; Basic Playback Controls; Playing An Mp3 Disc - Philips MCM190/22 User Manual

CD/MP3 Operation

DISPLAY/BAND
IMPORTANT:
The lens of the CD player should never be
touched.
X

Loading a disc

This CD player plays Audio Discs including CD-
Recordables, CD-Rewritables and MP3 CD.
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Press OPEN•CLOSE3 on
the top of the system to open
the CD compartment.
OPEN is displayed when you
open the CD compartment.
3
Insert a disc with the printed side facing up and
press down on OPEN•CLOSE3 to close the
CD door.
READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time (or the total number of
albums and tracks for MP3 disc) are shown.

Basic playback controls

To play a disc
Press PLAY/PAUSE 2; (on the remote
control 2;) to start playback.
12
The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
Press TUNING 4 ¢ (on the remote
control 4 ¢) once or repeatedly until the
desired track number appears in the display.
To find a passage within a track
1
Press and hold down on TUNING 4 ¢
(on the remote control 4 ¢).
The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release TUNING 4 ¢ (on the remote
control 4 ¢).
Normal playback continues.
To interrupt playback
Press PLAY/PAUSE 2; (on the remote
control 2;) during playback.
The display freezes and the elapsed playing
time flashes when playback is interrupted.
To resume, press 2; again.
To stop playback
Press 9.
Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE or TUNER.
– you select standby.
– you press the tape deck PLAY 2 key.

Playing an MP3 disc

1
Load an MP3 disc.
The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
"XXX YY" is displayed. XXX is the current
track number and YY is the current album
number.
2
Press 4 3 to select a desired album.