Table of Contents
Advertisement
CD/MP3/WMA Operation
IMPORTANT:
The lens of the CD player should never be
touched.
Playing a disc
This CD player plays Audio Discs including CD-
Recordables, CD-Rewritables and MP3 CD.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Press SOURCE once or more to select CD.
2
Press OPEN/CLOSE on the system to open
the CD compartment.
➜ OPEN is displayed when you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press OPEN/CLOSE to close the CD door.
➜ rEAd is displayed as the CD player scans
the contents of a disc, and then the total number
of tracks and playing time (or the total number
of albums and tracks for MP3 disc) are shown.
Press 2; to start playback.
4
➜ The current track number and elapsed
playing time of the track are displayed during disc
playback.
12
To pause playback press 2;. Press 2; again to
5
resume play.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
To stop disc playback, press STOP 9.
6
Note: CD playback will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER, USB or
MP3 IN.
– you select standby.
Selecting a different track
● Press ¡1 / 2™ (í/ë on the remote) once or
repeatedly until the desired track number
appears in the display.
● Press 2; to start playback.
Finding a passage within a track
Press and hold down ¡1 / 2™ (5/6 on the
1
remote).
➜ The disc is played at high speed and low
volume.
2
When you find the passage you want, release
¡1 / 2™ (5/6 on the remote).
➜ Normal playback continues.
Playing an MP3/WMA disc
1
Load an MP3/WMA disc.
➜ The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜ "XX YYY" is displayed. XX is the current
album number and YYY is the current track
number.
2
Press ALBUM+/- to select a desired album.
Press ¡1 / 2™ (í/ë on the remote) to
3
select a desired track.
➜ The album number will change accordingly as
you reach the first track of an album by pressing
4 (í on the remote) or the last track of an
album by pressing ¢ (ë on the remote).
Press 2; to start playback.
4
Advertisement
Table of Contents
