Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Automatic Programming - Philips MCM190/22 User Manual

Radio Reception

DISPLAY/BAND

Tuning to radio stations

1
Select TUNER source.
2
Press DISPLAY/BAND on the set repeatedly
or press TUNER on the remote repeatedly
until the desired waveband (FM or MW) is
displayed.
3
Press down on TUNING 4 ¢ and release
button.
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: Srch.
4
Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press TUNING 4
¢ briefly and repeatedly until you have found
optimal reception.

Programming radio stations

You can store up to a total of 20 radio stations (
10 for FM and 10 for MW respectively) in the
memory.
14

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1
Press ALBUM/PRESET 4 3 to select the
preset number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROGRAM for more than 2 seconds to
activate programming.
AUTO is displayed and available stations are
programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.

Manual programming

1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROGRAM to activate programming.
flashes in the display.
PROG
3
Press ALBUM/PRESET 4 3 to allocate a
number from 1 to 10 to this station.
4
Press PROGRAM again to confirm the setting.
disappears, the preset number and the
PROG
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

Press ALBUM/PRESET 4 3 until the desired
preset station is displayed.