Cd/Mp3 Operation; Playing A Disc; Selecting A Different Track; Finding A Passage Within A Track - Philips FWM139/12 User Manual

CD/MP3 Operation

IMPORTANT:
The lens of the CD player should never be
touched.

Playing a disc

This CD player plays Audio Discs including CD-
Recordables, CD-Rewritables and MP3 CD.
¶ CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Adjust the source selector to select CD source.
2
Press OPEN/CLOSE on the system to open
the CD compartment.
➜ OPEN is displayed when you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press OPEN/CLOSE to close the CD door.
➜ rEAd is displayed as the CD player scans
the contents of a disc, and then the total number
of tracks and playing time (or the total number
of albums and tracks for MP3 disc) are shown.
Press 2; to start playback.
4
➜ The current track number and elapsed
playing time of the track are displayed during disc
playback.
12
FWM139
To pause playback press 2;. Press 2; again to
5
resume play.
➜ The display freezes and the elapsed playing
time flashes when playback is interrupted.
To stop disc playback, press STOP 9.
6
Note: CD playback will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE, TUNER.
– you select standby.

Selecting a different track

● Press TITILE-/+ ¡1 or 2™ (í/ë on the
remote) once or repeatedly until the desired
track number appears in the display.
● Press 2; to start playback.

Finding a passage within a track

Press and hold down TITILE-/+ ¡1 or 2™
1
(í/ë on the remote).
➜ The disc is played at high speed and low
volume.
2
When you find the passage you want, release
TITILE-/+ ¡1 or 2™ (í/ë on the remote).
➜ Normal playback continues.

Playing an MP3 disc

1
Load an MP3 disc.
➜ The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜ "XX YYY" is displayed. XX is the current
album number and YYY is the current track
number.
Press ALBUM+ (ALBUM-/+ 5 /6 on the
2
remote) to select a desired album.
Press TITILE-/+ ¡1 / 2™ (í/ë on the
3
remote) to select a desired track.
➜ The album number will change accordingly as
you reach the first track of an album by pressing
TITILE- 4 (í on the remote) or the last
track of an album by pressing TITILE+ ¢
(ë on the remote).
Press 2; to start playback.
4