Preparation For Recording; Synchro Start Cd Recording; One Touch Recording; Recording Timer - Philips MCM390/21M User Manual

Philips micro hi-fi system mcm390 mp3
Table of Contents

Advertisement

Preparation for recording

1
Select TAPE source.
2
Load a recordable tape into tape deck with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
is shown.
REC
To stop recording, press 9.
It is not possible to listen to another source.
It is not possible to activate the timer function.

Synchro start CD recording

1
Select CD source.
Press S or T (¡ or ™) to select the
desired track to start recording.
You can programme the tracks in the order you
want them to be recorded (refer to "CD/MP3-
CD Operations - Programming the disc tracks").
2
Press RECORD to start recording.
Playing of the CD programme starts
automatically from the beginning of the CD. It is
not necessary to start the CD player separately.

One touch recording

1
Select CD, TUNER or AUX source.
2
If necessary, start playback of the selected
source.
3
Press RECORD to start recording.
Tape Operation / Recording

Recording timer

To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1
Select the preset radio station to record from
(refer to "Radio Reception - Tuning to preset
radio stations").
2
In standby mode, press PRESET 3 for more
than two seconds.
The current selected source is displayed.
3
Press SOURCE repeatedly until "REC TUN"
source is displayed.
4
Press PRESET 3 to confirm the source.
"SET ON TIME" is displayed and the clock
digits for the hours flash.
5
Adjust VOLUME on the front pannel to set the
hours.
6
Press PRESET 3 again.
The clock digits for the minutes flash.
7
Adjust VOLUME on the front pannel to set the
minutes.
8
Press PRESET 3 to confirm the recording start
time.
"SET OFF TIME" is displayed and the clock
digits for the hours flash.
9
Repeat steps 5-7 to set the finish time.
0
Press PRESET 3 to confirm the timer settings.
is shown and the recording timer is now
set.
Note:
– The recording timer will not be activated if the
system is in tape play mode.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcm390/21Mcm390

Table of Contents