Cd/Mp3-Cd Operations; Discs For Playback; Playing A Disc; Text Display - Philips MCM390/21M User Manual

CD/MP3-CD Operations

DISPLAY/BAND
IMPORTANT!
The lens of the CD player should never be
touched.
X

Discs for playback

This system is able to play :
– All pre-recorded audio CDs
– All finalised audio CDR and audio
CDRW discs
– MP3-CDs (CD-ROMs with MP3 tracks)
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.

Playing a disc

1
Select CD source.
2
Press OPEN•CLOSE3 on the top of the
system to open the CD compartment.
"CD OPEN" is displayed.
3
Insert a disc with the printed side facing up and
press OPEN•CLOSE3 to close the CD door.
"READING" is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and album are shown.
4
Press É Å to start playback.
12
To interrupt playback
Press É Å .
To resume playback, press É Å again.
To stop playback
Press Ç.
Notes:
– Disc play will also stop when you select another
source or the disc has reached the end.
– For MP3 disc, the disc reading time may exceed
10 seconds due to the large number of songs
compiled into one disc.

Text display

In CD mode
Press DISPLAY/BAND repeatedly to see the
following information.
Track number and elapsed play time of
current track.
Remaining play time of current track.
Total number of tracks played and total
played-back time.
Total remaining number of tracks and total
remaining play time.
In MP3-CD mode
Press DISPLAY/BAND repeatedly to select
four display modes : Number, Track, Album and
ID3.
Number Album number, track number and
elapsed play time.
Track Track name scrolls and elapsed play
time.
Album Album name scrolls and elapsed play
time.
ID-3 ID-3 tag scrolls once and elapsed play
time.

Selecting a different track

Press S or T (¡ or ™) repeatedly until
the desired track number appears in the display.
If playback is stopped, pressÉ Å to start
playback.