Changing The Activepure® Cell - Aerus BEYOND SANCTUAIRY Owner's Manual

CHANGING THE ACTIVEPURE® CELL
CAUTION: Disconnect power at the breaker or fuse panel before servicing unit. Always
follow OSHA lockout procedures to prevent accidental exposure to electrical energy.
1
1. Disconnect (unplug) power cord from unit.
Always follow OHSA electrical lockout safety
requirements to prevent Accidental release of energy
during service or maintenance activities.
3
3. Remove the unit from the mounting plate.
5
5. Separate the used ActivePure® cell from the
base unit and dispose of properly.
7
7. Secure with 2 thumb screws.
9
9. Secure unit with 4 thumb nuts.
WARNING! - UV Light in operation. Disconnect unit from power cord before
servicing. Failure to follow warnings may result in severe eye damage.
Power
Cord
2
2. Remove the 4 thumb nuts.
4
4. Remove the 2 thumb screws holding
the ActivePure® Cell.
6
6. Plug the new ActivePure® cell into the
base unit.
8
8. Insert the unit into the mounting plate.
10
10. Reconnect power
cord.
13