Related Manuals for Aerus Pure & Clean Plus A1041A
Summary of Contents for Aerus Pure & Clean Plus A1041A
- Page 1 PORTABLE AIR PURIFICATION SYSTEM READ MANUAL CAREFULLY FOR PROPER USE AND OPTIMAL OPERATION.
-
Page 2: Table Of Contents
Congratulations on your purchase! Your new Aerus Pure & Clean+ is designed to provide years of trouble-free, low maintenance operation. ® Be sure to read and follow all service procedures outlined in this owner’s manual, and use only genuine Aerus replacement parts. CONTENTS SPECIFICATIONS Product Overview. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Allow your Aerus® Pure & Clean+ to warm to room temperature before operating; damage may result from turning on a cold unit • Do not operate unit near heat sources, open flame, or combustible vapors or gases CAUTION •... -
Page 4: For Canadian Customers Only
FOR INQUIRIES CONTACT: AERUS CANADA, INC. Laird Business Park 3480 Laird Road, Units 2–5 Mississauga, Ontario, Canada, L5L 5Y4 W. Parrell, Manager (905) 569-9399 wparrell@aerusonline.com Aerus Canada, Inc. is affiliated with Aerus, LLC 1300 Valley Drive, Bristol, Virginia 24201... -
Page 5: Inspection & Installation
INSPECTION & INSTALLATION Remove protective packaging Remove unit from shipping carton Remove all protective materials Check for shipping damage and loose or broken parts Read Owner's Manual thoroughly prior to installation Determine placement location for the unit (See "Operation" on page 5) Insert the Power Supply Plug into the power receptacle on the rear of the unit. -
Page 6: Operation
To prevent injury, be sure the power cord is not accessible to small children. CAUTION • A·PURE MODE: The unit’s display shows the fan speed Take your Aerus® Pure & Clean+ unit out of the shipping carton and remove all protective materials. (low to high) and A·PURE to indicate that the ActivePure ®... -
Page 7: Settings & Adjustments
SETTINGS & ADJUSTMENTS The Aerus Pure & Clean+ can be turned on or off, and adjusted, using the control panel on the front of the unit. NOTE: If you are operating your central heating and air conditioning fan or other ventilation system continuously, set the coverage up to the total ventilated indoor area. -
Page 8: Led Display
LED DISPLAY Purifier Coverage / Modes (A·PURE / A·PURE+ / The LED Screen is used to display all current settings (see page 5) as well Fan Speed Depart Time Depart Room) as any maintenance reminders. (5 Levels) NOTE: If you are operating your central heating and air conditioning fan or other ventilation system continuously, set the coverage up to the total ventilated indoor area. -
Page 9: General Maintenance
If a unit is returned for repair, and it is determined that neglect of the unit or unauthorized tampering with any mechanical or electronic component of the unit caused the failure, Aerus reserves the right to void the product warranty. This will require the owner to pay for any required repairs. -
Page 10: Removing The Filter Assembly
To change the ActivePure Cell, follow the instructions on page 10. REMOVING THE FILTER ASSEMBLY • Unplug the unit before performing any maintenance procedures • Do not operate the Aerus Pure & Clean+ without the Filter Assembly and Back Cover properly installed WARNING Hand Strap... -
Page 11: Uninstalling The Optional Hepa Filter Sheet
UNINSTALLING THE OPTIONAL HEPA FILTER SHEET Unplug the unit before performing any maintenance procedures. WARNING The Optional HEPA Filter Sheet is designed specifically for areas with tobacco smoke, multiple pets, or anywhere contaminants in the air could be prevalent. • Protects your unit from indoor contaminants, which may shorten the life of your product •... -
Page 12: Removing The Purifier Plate & Activepure ® Cell
• Do not operate the Aerus® Pure & Clean+ without the Filter Assembly and Back Cover properly installed WARNING NOTE: Use genuine Aerus replacement parts only. Parts from anyone other than Aerus may damage your unit and void your warranty. To remove the Purification Unlock the ActivePure®... -
Page 13: Installing The Purifier Plate & Activepure ® Cell
CELL ® • Unplug the unit before performing any maintenance procedures • Do not operate the Aerus Pure & Clean+ without the Filter Assembly and Back Cover properly installed WARNING Slide the ActivePure Cell up and into the Insert the two thumbscrews and unit. -
Page 14: Troubleshooting
Depart Room, it will display DEPART ROOM plus the hours and minutes remaining. See page 5 for more information. Troubleshooting — What To Look For First I have plugged in the unit, pressed the ON button on the Aerus® Pure & Clean+, and nothing happens. What’s wrong? •... -
Page 15: Replacement Parts & Service
PART NUMBER ActivePure® Cell 50106 Purification Plate (not available in California) 50109 Filter Assembly 50107 Power Supply with U.S./Euro Plug 50108 To order replacement parts, contact your Independent Distributor/Contractor or Aerus Customer Service at 800.572.0502 (U.S.) or 800.668.0763 (CANADA). ®... -
Page 16: Warranty Information
Owner’s Manual. Failure to meet any of these requirements OF EXPRESSED OR IMPLIED WARRANTIES, CONDITIONS, will void this warranty. Servicing of your Aerus Pure & Clean+ by GUARANTEES OR REPRESENTATIONS, BREACH OF CONTRACT, parties other than our authorized representative and/or using NEGLIGENCE OR ANY OTHER LEGAL THEORY. -
Page 17: Fcc Declaration & Responsible Party
FCC DECLARATION OF CONFORMITY This equipment has been tested and found to comply Name: Aerus® Pure & Clean+ with the limits for a Class B digital device, pursuant of part 15 of the FCC Rules. These limits are designed to provide... - Page 18 For information regarding the use of this product please contact Customer Service 800.572.0502 (U.S.) 800.668.0763 (CANADA) www.aerusonline.com Aerus, LLC | 1300 Valley Drive | Bristol, VA 24201 | 800.572.0502 Aerus Canada, Inc. | 3480 Laird Road, Suite 2-5 | Mississauga, ON L5L 5Y4 | 800.668.0763 © Aerus, LLC. All Rights Reserved...