Right Shelf Assembly - Dyna-Glo DGA550SSP Manual

ASSEMBLY INSTRUCTIONS
23. Align the key holes in the right shelf assembly
(R) with the two screws (FF) just installed in
the grill body (O) and tighten screws. Insert
three screws (FF) in the remaining holes in the
supports and tighten.
Hardware Used
FF
M6x16Screw
WARNING: IT IS VERY IMPORTANT TO
CHECK AND ENSURE THAT EACH AND
EVERY BURNER IS FULLY ENGAGED
WITH THE ADJACENT VALVE ORIFICE
BEFORE COMPLETING STEP 24.
FAILURE TO DO SO MAY RESULT
IN FIRE OR EXPLOSION, POSSIBLY
CAUSING SERIOUS INJURY OR DEATH.
REFER TO MAINTENANCE SECTION
INSTRUCTIONS TO PROPERLY CHECK
THE ENGAGEMENT.
24. Open the lid of the grill body (O) and place
thefiveheattents(X)onthebracketsdirectly
above the burners.
23
x3
24
15
FF
O
WARNING
Burner
Valve
Orifice
X
R