Table of Contents
Advertisement
Internal Tape Drive Installation
12. Secure the tape drive in the selected server.
13. Replace the server cover, attach power cables to all devices, power on the
14. Verify that the tape drive is working properly.
Unpacking the Tape Drive
Unpack and inspect the tape drive for shipping damage:
1. Inspect the shipping box for damage. If you notice any damage, report it to the
2. Open the shipping box and remove the accessories package. Open the
3. With the drive still in the shipping box, reach under and around the drive.
4. Carefully remove the drive from the protective bag.
Note:
future. You must ship the DLT VS 40/80 GB tape drive in the original or equivalent
packing materials to preserve your warranty.
30
server and other devices.
If the room where you are unpacking the drive differs from the
Caution:
temperature at which the tape drive was shipped or stored by 30º F (15º C) or
more, let the drive acclimate to the surrounding environment for at least 12
hours before opening the shipping carton.
shipping company immediately.
accessories package; you will need these items during installation.
Carefully lift it out of the shipping box and place it on the work surface, top
facing up. Do not stand the drive on either end.
Save the packing materials in case you need to move or ship the drive in the
DLT VS 40/80 GB Tape Drive Reference Guide
Advertisement
Table of Contents
