HP StorageWorks DLT VS 40 Reference Manual page 34

Internal Tape Drive Installation
Note:
included with your server.
Figure 10: Installing an internal drive
3. Install an LVD/SE SCSI host adapter in the server that is to be the host for the
4. If necessary, attach the drive rails that ship with the drive.
Note:
information on the correct rails to use with your server.
5. Insert the drive into an available 5 1/4-inch drive bay.
Note:
documentation included with your server.
6. Secure the tape drive into the server according to the documentation included
7. Connect an available power cable and the wide SCSI signal cable.
34
Your server may differ from the following illustrations; refer to the documentation
drive, if necessary.
Your server may supply rails in the drive bay. Refer to your server user guide for
You may need to remove the front cover from the drive bay. Refer to the
with the server.
C T
SE LE
T
EJ EC
R
EN TE
DLT VS 40/80 GB Tape Drive Reference Guide