Introduction
Software Included
The DLT VS 40/80 GB tape drive ships with a CD that contains Microsoft
certified drivers that support the Microsoft Windows NT or Windows 2000
operating systems. Multiple software utilities are also available to customers
through the HP website and can be downloaded free of charge.
System Requirements
Your DLT VS 40/80 GB tape drive requires a wide, SCSI-2, Low Voltage
Differential (LVD) or Single-Ended (SE) SCSI bus. The following controller
types are supported:
■
■
■
Note:
(HVD) controllers.
Install and configure the controller before beginning the drive installation, using
the documentation included with the controller. If you connect your DLT VS
40/80 GB tape drive to an SE SCSI bus, drive performance is limited to the
maximum data transfer speed of the SE bus.
16
Fast SCSI-2 (Wide)
Wide-Ultra SCSI
Ultra-2 SCSI
The DLT VS 40/80 GB tape drive does not support High Voltage Differential
DLT VS 40/80 GB Tape Drive Reference Guide