Advertisement
Table of Contents
WARNINGS
As with many other high-tech products, this VISION X LED Kit
requires a bit of attention before you can use it. Please read the
accompanying information carefully first.
1)
Don't stare directly into the light or shine directly into the eyes of
another person as this may cause temporary loss of vision.
2)
Never disassemble the products, as all parts must be factory
serviced to insure proper operation and will void warranty if
opened.
3)
The LED light is to be mounted on the vehicle only in a vertical,
bottom-mounting, or in a suspended position.
4)
After turning on the light, the body may be hot enough to warrant
a burn risk. Be careful when you touch the body after turning on
the light for a long period of time.
5)
Use the supplied wire adapters for electrical installation.
6)
Ensure the LED light does not adversely affect the performance
of low beam, high beam, engine cooling or the driver's view.
LICENSE PLATE LED LIGHT KIT
Installation Instructions & User's Manual
ZZZ9,6,21;86$FRP
Advertisement
Table of Contents
Related Manuals for Vision X LICENSE PLP910
Summary of Contents for Vision X LICENSE PLP910
- Page 1 LICENSE PLATE LED LIGHT KIT Installation Instructions & User’s Manual WARNINGS As with many other high-tech products, this VISION X LED Kit requires a bit of attention before you can use it. Please read the accompanying information carefully first. Don't stare directly into the light or shine directly into the eyes of another person as this may cause temporary loss of vision.
- Page 2 9,6,21 ; /,&(16( 3/$7( .,7 Installation Instructions & User’s Manual MOUNTING INSTALLATION Start off by removing your license plate from the front of your vehicle b y unscrewing the bolts holding it to your vehicle. Making sure that you k eep track of all bolts that were used to take off your license plate as yo u will need them to put it back on.
Need help?
Do you have a question about the LICENSE PLP910 and is the answer not in the manual?
Questions and answers