Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Atosa ATMG-24
Summary of Contents for Atosa ATMG-24
- Page 1 Gas Countertop Griddles Operating Instructions (Flame out protection) Before you begin, please read these instructions carefully to use this product correctly, to make the product perform ideally, and to avoid hazards. Models: ATMG-24 / ATMG-36 / ATMG-48...
- Page 2 Dear customers and users： Thank you for purchasing our products. In order to be able to better use this product, please read these instructions carefully before any operation, and follow the guide, to avoid any unnecessary trouble during using. Please keep this instruction manual in a safe place for convenient reference and operation.
-
Page 3: Table Of Contents
Gas Countertop Griddles The Installation, Operation and Maintenance Guide Contents 1. Safety Protection ........- 3 - 2. Brief Instruction ........- 3 - 3. Manufacture’s Authority and Responsibility ..... - 3 - 4. Parameter Specifications ........ - 4 - 5. -
Page 4: Safety Protection
1. Safety Protection Please make sure that the operator is an authorized and licensed technician before you allow him/her to install and operate the products. Be sure to strictly follow this instruction guide during installation and using. The manufacturer is not responsible for any danger or accidents caused by improper operation or maintenance. -
Page 5: Parameter Specifications
4. Parameter Specifications 4.1、Outline Dimensions(mm) ATMG-24 ATMG-36 - 4 -... - Page 6 ATMG-48 Gas Connection: NOTE: ALL GAS FITTING MUST ONLY BE CARRIED OUT BY AN AUTHORISED PERSON. The appliances do not require an electrical connection, as they function totally on the gas supply only. It is essential that the gas supply is correct for the appliance to be installed and that adequate supply pressure and volume are available.
-
Page 7: Transport And Storage
Intake-tube Total Nozzle Rate Rate Model and control pressure Species MJ/h MJ/h (mm) method （kPa） Natural 2 pieces ATMG-24 Independent L.P. Gas control ULPG Natural 3 pieces ATMG-36 Independent L.P. Gas control ULPG Natural 4 pieces ATMG-48 Independent L.P. Gas... - Page 8 6.1、Unpacking and Installation Please dispose of all packaging materials and residues after unpacking; Check the equipment. If it is damaged, please keep wrappers and receipts which must be signed by the carrier representative (Driver), and contact the carriers to pursue a claim within 15 days after receiving; Be sure to install supporting legs before using, and do not tear up any label or logo before normal using;...
-
Page 9: Safety Notices And Precautions
●Remove top panel, and needle type pressure joint screw arbor (Fig.1), then slip rubber tube of pressure gauge over needle type pressure joint; ●Start the equipment in accordance with the instructions, measuring gas supply pressure (dynamic pressure) in the work state;... -
Page 10: Operating Instructions
Please keep clean and free of flammables surroundings. Warning! Any erroneous installation, adjustment and refit may cause property damage or personal injury and maintenance failure. Read the instructions carefully before installation and using. Warning! Operation instruction must be placed in a conspicuous location. When customers smell gas in the process of using, you should take safety precautions immediately. - Page 11 Do not use a fan or air conditioning to the flame, so as to avoid the flame extinguished and a safety accident. Must be installed the matched exhaust hood according to the local regulations above the equipment. To ensure that the air in the kitchen is kept in circulation. The pilot light has been set at the factory.
-
Page 12: Cleaning And Maintenance
the valve closed. 8.4、Stove Operation Before using the stove for the first time, please use a mild detergent to wipe it for cleaning. Do not use corrosive or abrasives detergent. Turn the burners on about 15-20 minutes before broiling for preheating, according to the cooking requirement to adjust the flame size. - Page 13 Warning: Before cleaning, all control valves must be turned off. Strictly follow the lighting instructions to work again after cleaning! Warning: Wait for the equipment to cool down after the unit has been turned off before you cleaning! Cut off the gas source as not in using; If the equipment is not used for a long time, clean the surface by wiping it with a soft cloth and place it in a well-ventilated area;...
-
Page 14: Troubleshooting
10. Troubleshooting <Table 3> Possible causes Problem solving Problems 1.Insufficient gas pressure 1.Contact the local in pipe gas supply dept. 2.Nozzle occlusion 2.Dredge nozzle 3.Thermocouple connection 3.Tighten Not lighting loose thermocouple 4.Replace 4.Thermocouple damage thermocouple 5.Replace 5.Gas control valve failure control valve 1.Insufficient gas pressure 1.Contact the local... - Page 15 Notice： 1、Pressure maintaining valve connects with air intake must be installed by authorized and licensed technicians to ensure interface tightness. 2、When the regulator is connected, the maximum load value of natural gas can not exceed 1.13kPa, the maximum value of liquefied gas can not exceed 2.75kPa. 3、Screw the hex nut (Fig.6) before connect air intake, ensure gas mark (Fig.7) on the plastic core match with connected gas source, if not, then pull out the plastic core and change another head, insert it again.
- Page 16 But to update some components and necessary maintenance, can prolong life length of the products. Contact the dealer for assistance. For service and spare part inquiry, please contact following Atosa Catering Equipment Australia Pty Ltd 3-9 Forge Street,Blacktown,Sydney TEL: 1800 886 888...
Need help?
Do you have a question about the ATMG-24 and is the answer not in the manual?
Questions and answers