Avaya 8800 Planning And Engineering, Network Design page 30

Hardware fundamentals and guidelines
MSTP instances
Advanced Filters
ACLs for each system
ACEs for each system
ACEs for each ACL
ACEs for each port
IP, IP VPN/MPLS, IP VPN Lite, VRF Lite
IP interfaces (VLAN- and brouter-based)
VRF instances
ECMP routes
VRRP interfaces
IP forwarding table (Hardware)
BGP/mBGP peers
iBGP instances
eBGP instances
BGP forwarding routes BGP routing information
base (RIB) BGP forwarding information base (FIB)
IP VPN routes (total routes for each system)
IP VPN VRF instances
Static ARP entries
Dynamic ARP entries
DHCP Relay instances (total for all VRFs)
Static route entries
OSPF instances for each switch
OSPF areas for each switch
OSPF adjacencies for each switch
OSPF routes
OSPF interfaces
OSPF LSA packet maximum size
RIP instances
RIP interfaces
RIP routes
Multiprotocol Label Switching
MPLS LDP sessions
June 2016
Maximum supported 8692SF with SuperMezz or
8895SF (R or RS series modules)
32
4000
1000
1000
2000: 500 inPort 500 inVLAN 500 outPort 500
outVLAN
1972
255
5000
255
250 000
250
on GRT
on 256 VRFs (including GRT)
BGP FIB 250 000 BGP RIB 500 000
180 000
255
2048 in a VRF 10 000 in the system
32 000
512
2000 in a VRF 10 000 in the system
on 64 VRFs (including GRT)
5 in a VRF 24 in the system
80 200 in the system
20 000 in a VRF 50 000 in the system
238 500 in the system
3000 bytes
64
200
2500 in a VRF 10 000 in the system
200
Planning and Engineering — Network Design
Comments on this document? infodev@avaya.com
Table continues...
30