Table of Contents
Advertisement
User's Guide
Please load paper in manual tray
(200080).
Please check tray 1 (200003).
Please load paper to tray1 (200081)
IP conflict (500000).
Please check network settings.
Net cable unplugs (500001).
Plug in Cable.
DHCP no response (500002).
Please check network settings.
USB flash disk not found.
USB flash disk connection fails.
Job abort.
PRINTER not ready.
Try again later.
Buffer full Job abort.
Buffer full
Print scanned images：1
Cancel job：2
Resetting default settings fails.
Please try again later.
Scanner Calibration fails.
Please try again later.
Reset count fail.
Please try again later.
Setting fails.
Please try again later.
Paper empty in the manual tray.
Pick up error. Paper empty, paper jam, or
pickup failed in tray 1.
Tray 1 paper empty.
Check your network setting.
Connect network cable.
Check network settings.
Insert USB flash drive to the USB flash
port.
Check the connection of USB flash drive.
PRINTER is busy with current job. Wait until
current job is completed.
Memory is not enough to process the
scanned images.
Memory is not enough to process the
scanned images. Press [1] to print the first
few images which have not exceeded the
memory limit or press [2] to cancel job.
Resetting default settings.
Please try again by pressing the Menu
button and then choosing
System>Management>Calibration.
Please try again by pressing the Menu
button and then choosing
System>Management>Reset count.
Setting the Menu option fails. Check your
setting.
64
Advertisement
Table of Contents
